hestan KWD 30 Mode D'emploi page 10

USING THE WARMING DRAWER
CONTROLS AND INDICATORS
A single knob (Mode Selector) controls the warming drawer.
EN
It has positions for OFF, Proofing, and Defrost, plus a continuous range from WARM to MAX.
This manual will use MED to designate a setting halfway between WARM and MAX.
The interior lights come on when the drawer is opened.
The panel indicator light comes on when the knob is in warming mode. (From WARM to MAX.)
OPERATION
Open the drawer. Turn the knob to set the desired function or temperature.
To turn off the appliance, turn the knob to the OFF position.
WARM > MAX
HEATING TIME
The warming time is influenced by:
• Amount of dishes or food in the drawer
• The arrangement of items in the drawer
• The temperate set.
In general, the more dishes or items in the drawer and the higher the set temperature, the longer
it will take to reach the set temperature.
DISH WARMING
• Dishes for 6 persons, set temperature to MIN or greater.
• Warming time 30-35 minutes
With experience you will learn the optimal temperature setting for your needs.
DEFROSTING
The defrosting function only uses forced ventilation without any active heating element.
Procedure
• Place items to defrosted, turn the knob to the defrost setting.
8
©2018 Hestan Commercial Corporation
Mode Selector
Off
Proofing
Defrost
Warming 105 - 195°F [40-90°C]
(CONT.)
Function
None
77-95°F [25-35°C]
Fan, no heat