Available Accessories; Playing Songs On Ipod; Basic Operation; Displaying Text Information On Ipod - Pioneer DEH-P5000UB Mode D'emploi

Section
06

Available accessories

Playing songs on iPod

Basic operation

You can use this unit to control an interface
adapter for iPod, which is sold separately.
% Fast forward or reverse
Push and hold MULTI-CONTROL left or right
for about one second and release.
% Select a track
Push MULTI-CONTROL left or right.
Notes
! Read the precautions for iPod on page 54.
! While iPod is connected to this unit, PIONEER
(or (check mark)) is displayed on the iPod.
! If an error message such as ERROR-19 is dis-
played, refer to Error messages on page 50.
! When the ignition switch is set to ACC or ON,
the iPod's battery is charged while the iPod is
connected to this unit.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off.
! Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
! The iPod is turned off about two minutes after
the ignition switch is set to OFF.
Displaying text information on
iPod
The operation is the same as that of the iPod
connected to USB interface of this unit. (Refer
to Displaying text information on iPod on page
20.)

Browsing for a song

The operation is the same as that of the iPod
connected to USB interface of this unit. (Refer
to Browsing for a song on page 20.)
However, the selectable categories are slightly
different. Selectable categories are
32
En
PLAYLISTS (playlists)—ARTISTS (artists)—
ALBUMS (albums)—SONGS (songs)—
GENRES (genres)

Function and operation

1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
REPEAT (repeat play)—SHUFFLE (shuffle)—
PAUSE (pause)
Function and operation
REPEAT is the same as that of iPod connected
to USB interface of this unit.
PAUSE is the same as that of the built-in CD
player.
Function name Operation
Refer to Function and operation on
REPEAT
page 21.
Refer to Pausing playback on page
PAUSE
16.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the previous display, press BACK.
! To return to the main menu, press and hold
BACK.
! To return to the ordinary display, press
BAND/ESC.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.