Maintenance And Troubleshooting; Special Conditions; Optional Accessories - Self Climat DN 50 NT Instructions De Montage Et Mode D'emploi

4.2 / Maintenance and trouble shooting
The operations that can be done by user are limited to installation and connecting up.
Any dismantling, repair or modification to the overfill prevention device automatically cancels the manu-
facturer's warranty.
Consequently, this work can only be done by the «Self Climat» company after return of the appliance to
the factory.
In the event of a fault on the overfill prevention device it should be returned to :
An electrical continuity test must be done every year. This test can only be done by personnel autho-
rised to work on equipment for use in explosive atmospheres.
4.3 / Dismantling
The overfill prevention device can only be dismantled in the event of malfunctioning or replacement.
It can only be dismantled by personnel authorised to work on equipment for use in explosive atmospheres.
V) SPECIAL CONDITIONS
Self Climat automatic overfill prevention devices are guaranteed for one year from the invoice date against
manufacturing faults accepted by our factory.
Our overfill prevention devices cannot be modified in any way without causing a loss warranty.
As we do not install the equipment ourselves no claim whatsoever for indemnity will be accepted whether
for direct or indirect causes.
VI) OPTIONAL ACCESSORIES
1) Tester Ref : 308 267
Composition
-
Stainless steel cable ø 1mm Lg 2 m At
one end a traction ring and at the other
a cable clamp
-
Brass union ø 1'' F, fitted with a cover
on a chain.
16
Self Climat
Z.I Sud - Rue des Epinettes
CS 50152 TORCY
77208 MARNE LA VALLEE CEDEX 1
fRANCE
Self Climat OPD
NT/INOX
Tester in the rest position - fitted on the float NT/INOX
Perspective 1
+/- 180
1" tapping
Release valve
(Type NT)