General Specifications - Self Climat DN 50 NT Instructions De Montage Et Mode D'emploi

I) MARKING
Self Climat DN 50 NT, DN 80 NT and DN 80 Inox type overfill prevention devices all conform to the 94/9/EC directive.
This equipment, suitable for use in group IIB explosive atmospheres, is constructed according to the following
European standards :
NF EN 13616
NF EN 13463-1 : 2001
NF EN 13463-5 : 2003
DN 50 NT
Self Climat 77200TORCY
FRANCE
Limiteur de Remplissage
Type DN50 NT Subtype A2
0080
II1 G c IIB T6
T : -25°C à +60°C
amb.
INERIS 07ATEX0037
II) GENERAL SPECIfICATIONS
2.1 / Description
The Self Climat overfill prevention device is a mechanical safety device placed on the filling tube inside the
liquid storage tank.
The purpose of this «completely safe overflow prevention device» is to reduce environmental risks, water
pollution risks and all fire or explosion risks that could arise while filling liquid petroleum fuel storage tanks.
It is essential to verify the compatibility between the overfill prevention device and the liquid stored in the tank,
as the characteristics of the liquid determine the type of overfill prevention device to be installed.
The Self Climat technical dept has all the information necessary to advise installing technicians in their choices.
OVERFILL PREVENTION DEVICE
Description
OPD- DN 50 NT Type
OPD - DN 80 NT Type
OPD - DN 80 INOX Type
* The temperature of the equipment depends on the temperature of the fluid
12
: 2004
DN 80 NT
Self Climat 77200TORCY
FRANCE
Limiteur de Remplissage
Type DN80 NT Subtype A2
0080
II1 G c IIB T6
T : -25°C à +60°C
amb.
INERIS 07ATEX0037
Pump
Working
DN
flow
pressure
6 bars
40 m /h 50
3
60 m /h 80 8 bars
3
60 m /h 80 8 bars
3
Self Climat 77200TORCY
FRANCE
Limiteur de Remplissage
Type DN80 INOX Subtype A2
0080
II1 G c IIB T6
T : -25°C à +60°C
amb.
INERIS 07ATEX0037
Working
Reference
temperature*
308 279 -25°C to +60°C
308 277 -25°C to +60°C
308 268 -25°C to +60°C
DN 80 INOX
Max. fluid
temperature
+80°C
+80°C
+80°C