Oehlbach POWERSOCKET 907 Mode D'emploi page 19

FEATURE
∙ 8 individual sockets
∙ 4 digital (filtered) outlets / 4 analog (unfiltered) Sockets
∙ The two groups of sockets consist of 2 filtered and 2
unfiltered sockets and can be switched separately via
the POWER switch and the group 2 switch. Group 2 is
only supplied with power when the POWER switch is also
switched on.
∙ Solid housing made of brushed aluminum in anthracite color
∙ with stable plastic side caps
∙ Phase correct connection by control lamp and
∙ phase marking on the single socket
∙ Integrated sheath current filter against hum loops and
∙ high-frequency interference pulses
∙ 2 different USB sockets for charging/operating devices (see
specification for technical data)
∙ Overload protection with LED indicator light
∙ 24 carat gold-plated plug contacts
∙ Very high quality internal cabling:
Inner conductor made of high-purity and oxygen-free
copper
2.1 mm² inner conductor cross-section
Gold-plated brass rails for internal power distribution
∙ External power cable with IEC connector:
Inner conductor made of oxygen-free copper
1.5 mm² inner conductor cross-section
1.5 m cable length
SPECIFICATION
Ambient temperature:
Mains voltage:
POWERSOCKET 907
-5°C to +35°C
230 V / 50 Hz
19