Cycle Overview - Samsung FlexDry DV 60M9900 Série Manuel D'utilisation

11 Anti Static
12 Adjust Time
13 Smart Control
(Elec.) / Smart
Monitor (Gas)

Cycle overview

Sensor Dry cycles
Cycle
NORMAL
HEAVY DUTY
TOWELS
BEDDING
DELICATES
PERM PRESS
ACTIVE WEAR
FlexDry_DM9900M-DC68-03381F-03_EN.indd 45
Anti Static reduces static electricity that occurs from clothing
friction. This is done by spraying steam into the drum in a later
stage of the drying cycle.
NOTE
The Anti Static function is only available with NORMAL, HEAVY
DUTY, PERM PRESS, DELICATES, and TIME DRY.
You can change the set time for the selected cycle. This is
available only with TIME DRY, AIR FLUFF, and WRINKLE AWAY. To
change the cycle time, press Adjust Time
until the desired time is displayed.
After connecting the Tumble Dryer to your home network using
the Samsung Smart Home app, you can control or monitor the
dryer remotely. When started, the Smart Control (Smart Monitor)
indicator blinks. The dryer enters waiting mode and waits for
remote commands.
• For most fabrics including cottons and linens.
• If NORMAL is selected, the Eco Dry function is enabled by
default. For more information, see Eco Dry in the Control panel
section.
• For drying items made out of heavy fabrics, such as jeans,
corduroys, or work clothes, with high temperature heat.
• For bath towels and similar items.
• For bulky items such as blankets, sheets, and comforters.
• For heat-sensitive items at a low drying temperature.
• Use to dry wrinkle-free cottons, synthetic fabrics, knits, and
permanent press fabrics automatically.
• For exercise wear and outdoor wear such as sports jerseys,
training pants, water-repellent jackets, and other performance
clothing.
• Thick fabrics like a zipper or velcro closure on a jacket, or
training socks may not be completely dried.
or Adjust Time
Description
English 45
2017-06-01 3:28:33