Sony WEGA KV-HZ34 Mode D'emploi page 41

Select
"Video Label"
"Color System"
"Eco Mode"
"S Input"
Notes
• If "Eco Mode" is on, the ECO MODE (
• "Game Mode" is available only when receiving signals through the t
• When high-definition (HD) signals are input, "Wide Mode" and "Game
To return to the normal screen
Press MENU.
To
assign labels to the connected audio/video equipment.
V i d e o L a b e l
V i d e o I n p u t :
V i d e o 1
L a b e l : V i d e o 1
S e l e c t : C o n f i r m :
See "Assigning labels to the connected audio/video equipment"
on page 49.
select the color system. Normally, set this to "Auto".
You can select the color system for each channel or each video
input.
reduce power consumption of your TV to save energy.
Move up or down to select "On", then press
To cancel, select "Off", then press
select the S video input mode.
Move up or down to select "Auto" to receive the S video signal
automatically when the signals are input through both the
video input) and
channel, then press
To deactivate the S video input, select "Off", then press
right corner of the screen when you turn on the TV or when you press
on the remote.
(video input), (S video input), or
Mode" do not function.
When progressive (SD) signals are input, "Game Mode" does not
function.
E n d :
.
(video input) jacks of the same video input
.
) icon will appear at the bottom
(component video input) jacks.
Adjusting Your Setup (MENU)
.
(S
.
continued
41