Fanelite FW45-DC Mode D'emploi page 15

All manuals and user guides at all-guides.com
IMPORTANT: Programmable remote control on several fans. By default, the remote control
only synchronizes with its fan, but it can be synchronized to several fans. To do this, check
that the batteries are installed in the remote control, plug in the fan you want to take control
of and within 10 seconds, press the POWER ON button on the remote control 4 times. At the
4th press, hold the button until you hear a beep sound, indicating that the synchronization
procedure was successful. Repeat the procedure with all the fans you want to synchronize
on the same remote.
Power ON
Press the ON button to turn on the fan.
Speed setting
Press the corresponding buttons to increase or decrease the speed.
6 speeds in total, speed 1 corresponds to the lowest speed and speed 6 to the highest
speed.
The selected speed is displayed on the indicator of the remote control.
Swing
Press the SWING button to activate / deactivate the oscillating mode.
Modes of ventilation
That fan has 3 modes of ventilation : normal, natural or sleep.
The fan works by default in normal mode.
To activate natural or sleep mode, press the corresponding button. To deactivate the mode,
press the button again, the fan returns to normal mode.
- Normal mode : The fan operates in normal mode when the natural and sleep modes are
disabled. The fan operates normally according to the selected speed.
- Natural mode (feel) : Press on the corresponding button. The fan reproduces the effect of
the natural wind by alternately operating at different speeds and intermittencies.
- Sleep mode : Press on the corresponding button. The fan goes at first speed, so that the
fan is as quiet as possible. The night mode is ideal in case of sensitivity to colds.
Timer
You can set the timer by pressing the TIMER buttons so that it turns off automatically once
the selected time has been reached.
Press the TIMER buttons to set the timer, up to 9h max.
Each time you press a button, the timer increases or decreases by one hour.
The selected time is displayed on the indicator of the remote control.
To deactivate the timer, press on the TIMER OFF button.
Power OFF
Press the OFF button to turn off the fan.
15