After Use; Changing The Battery - Fakir IC 1025 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
You are recommended to empty the filter after every vacuuming operation.

Changing the battery

The battery vacuum cleaner is equipped with a replaceable NiCd-battery (nominal volta-
ge 6 V – charging capacity max. 1900 mAh) which can be recycled. In the case of an ear-
lier defect, the battery block must be delivered to a collecting point for used batteries.
Before removing the battery, leave the unit in the switched on condition until the battery
is "empty".
Push the locking catche
to the back
14

after use

Removing the filter
Press the release button and pull the suction compartment
off outwards while swiveling it.
Remove the filter from the suction compartment.
Shake the dust and dirt of the suction compartment and of
the filter into a refuse bin.
In the case of stronger contamination of the filter and of the
suction compartment you can wash this with a mild clea-
ning agent. Make sure that the filter and suction compart-
ment are completely dry before renewed use.
remove the battery
compartment lid
change the battery

Publicité

Table des Matières
loading

Table des Matières