Lexmark OptraImage 443 Guide Rapide page 13

Scanner indicator
OptraImage Setup Guide
There are three lights on top of the scanner. Each represents
lights a different mode.
Yellow
Indicator lights
Green
Red
Power indicator. When lit, power is on.
Scanner is ready, but not in Power Saver mode. If
green and red light is off and yellow light is on,
scanner is in Power Saver mode. Pressing a button
will remove the scanner from Power saver mode.
When the scanner is reactivated, there is a short
warm-up period.
Error. When lit, an error is indicated and scanning is
stopped. Check for possible paper jams or other
paper feed errors. See user documentation on the
CD.
11