Technical Data; Charger Operation - sunjoe 24V-WSB-CT Manuel De L'opérateur

Masquer les pouces Voir aussi pour 24V-WSB-CT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Technical Data

Motor ............................................................................... 400 W
Battery Voltage Max* .................................................. 24 V D.C.
Speed Settings ........................................................................ 2
Air Speed Max ............................................................. 185 mph
Air Flow Max ................................................................ 105 cfm
Small Nozzle Diameter ..................................... 0.2 in (5.3 mm)
Medium Nozzle Diameter ............................... 0.5 in (13.2 mm)
Large Nozzle Diameter ................................... 0.9 in (22.2 mm)
Net Weight ........................................................2.3 lbs (1.05 kg)
* Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
• Small, medium, and large nozzles (attached)
• Cordless workshop blower + vacuum body
• Blower + vacuum tube
• Collection bag (2)
• Manual with registration card
NOTE: In order to operate this cordless workshop blower +
vacuum you will need iON+ 24V System batteries and chargers.
See page 13 for battery options and specifications, or visit
sunjoe.com.
1. Carefully remove the cordless workshop blower + vacuum
and check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless workshop
blower + vacuum. The packaging is made of recyclable
materials. Properly dispose of these materials in accordance
with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation risk!
customer service center at
®
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless workshop blower + vacuum
you will need an iON+ 24V System battery and charger. See
page 13 for battery and charger options and specifications,
or for more information visit sunjoe.com.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery's service life will be greatly shortened.
Lights
Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge as
needed.
Immediately after using the battery pack, the charge level
button may display a lower charge than it will if checked a few
minutes later. The battery cells "recover" some of their charge
after resting.

Charger Operation

m
WARNING!
Charge only iON+ 24V lithium-ion battery
packs with its compatible iON+ 24V lithium-ion quick charger.
Other types of batteries may cause personal injury and
damage. To reduce the risk of electric shock, do not allow
water to flow into the charger's AC/DC plug.
7

Publicité

Table des Matières
loading

Table des Matières