Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. To use either the small or medium nozzle, simply place
either on top of the large nozzle and press on until secure
(Fig. 8).
Fig. 8
Operation
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless workshop blower + vacuum
you will need an iON+ 24V System battery and charger. See
page 13 for battery and charger options and specifications,
or for more information visit sunjoe.com.
Starting + Stopping
m
CAUTION!
Starting, stopping, and restarting a DC
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless workshop blower + vacuum, always wait at least five
seconds after stopping before restarting the workshop blower
+ vacuum.
1. Insert the battery into the battery compartment until it
clicks to lock it into position (Fig. 9).
Fig. 9
Battery
pack
Small nozzle
Large nozzle
Battery
Compartment
2. To start the cordless workshop blower + vacuum,
press the ON/OFF trigger once (Fig. 10).
Fig. 10
3. To turn the tool off, press the ON/OFF trigger once more
(Fig. 10).
4. To control the speed, use the speed selector and slide to
choose HIGH or LOW (Fig. 11).
Fig. 11
Operating Tips
m
WARNING!
Use the cordless workshop blower +
vacuum only in daylight or good artificial light.
• When using the cordless workshop blower + vacuum,
plant your feet firmly on the ground and place your
dominant hand on the unit handle to control the unit.
Use your other hand to steady the unit as needed.
• Wear personal protective equipment during your work
session. This includes boots, safety glasses/goggles,
ear defenders, long pants and a long-sleeve shirt.
• Make sure the Blower + vacuum tube is not directed at
anybody or any loose debris before starting the unit.
• Verify that the unit is in good working condition. Make sure
the tubes are in place and secure.
• Keep a firm grip on the unit handle while in use.
• To reduce the risk of hearing loss associated with
increased sound levels, hearing protection is required.
• Operate power equipment only at reasonable hours—
not early in the morning or late at night when people might
be disturbed. Comply with times listed in local ordinances.
Usual recommendations are 9:00 am to 5:00 pm,
Monday through Saturday.
10
ON/OFF trigger
Publicité
Table des Matières
