THOMSON 512166 Mode D'emploi page 39

Wireless colour video intercom With
video surveillance option
• The time slot is configured on M:
The sensitivity level for motion
detection can be set using the icons
below:
LV3=High sensitivity
LV2=Average sensitivity
LV1=Low sensitivity
If you wish to stop motion detection
on a part of the image filmed by the camera, it is
possible to hide zones:
None of the blue boxes will detect
motion.
9 - SCANNING ThE ChANNELS
SCAN mode for the various active channels is
instantly accessible from the main menu
using this key:
10 - "PARAMèTRES SYSTèME" (SYSTEM
SETUP) MENU
1 Setting the date and time
2 Video format
3
Energy saver
4 Period of inactivity
5 Languages
10.1 - setting the date and time
Use the + and - keys to change the date and time.
10.2 - video format
For selecting Pal or NTSC video formats.
In Europe, the Pal video format
is recommended.
d - SETup
1
2
3
4
5
en
15