Product Description - ANSMANN WFL800 Mode D'emploi

• Do not repair the product yourself! Have repairs carried out by a
professional electrician.
• The luminary is non-replaceable. The entire product must be replaced
when the luminary reaches the end of its service life.
• Caution! Use a H05RN-F 3G 1 mm
for connection only.

PRODUCT DESCRIPTION

(see page 2)
1 LEDs
2 Set screws
INSTALLATION
• Interrupt the power supply to the cable at the fuse box and secure it
against reconnection by third parties.
• Select a suitable location for product installation.
Please note:
The mounting holes in the bracket have a diameter of 5 mm. Select suitable
mounting materials.
Mounting materials are not included. This manual shows by way of example
installation using 2 screws and 2 wall anchors. If necessary, you can use
other mounting materials.
Deutsch |
Svenska | Italiano | Nederlands | Suomi | Norsk | Dansk
or higher category connection cable
2
English | Français | Español | Português
3 Power cord
4 Mounting bracket
15