General Warnings; Technical Specifications - Mark INFRA ZONE CONTROL Livret Technique

Read through this document before you
begin installation and commissioning
Incorrect installation, adjustment, alteration, repair or maintenance work may lead to material
damage or injury. All work must be carried out by certified, qualified professionals. If the
appliance is not positioned in accordance with the instructions, the warranty shall be rendered
void. This appliance is not intended for use by children or persons with a physical, sensory or
mental handicap, or who lack the required experience or expertise, unless they are supervised or
have been instructed in the use of the appliance by somebody who is responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
1.0 General
1.1 Subject to modification
The manufacturer is continuously striving to improve its products and reserves the right to make
changes in the specifications without prior notice. The technical details are assumed to be correct,
but do not form the basis for a contract or guarantee. All orders are accepted on the standard
terms of our general conditions of sale and delivery (available on request).
1.2 General warnings
Installation must meet the current local and/or national regulations. The Infra zone control must
therefore be installed by a competent and qualified fitter, in compliance with the national and
international legislation. In the event of faulty installation, calibration, modification, maintenance or
repair, the guarantee shall cease to apply.
2.0 Technical specifications
2.1 Technical details Infra zone control
• Delivery: Control panel with external display
• Dimensions external display (wxhxd): 160x98x43mm
• Dimensions switchbox (wxhxd): 376 x 300 x 120mm
• Weight switchbox: 4800 gram
• Weight display: 206 gram
• Protection class: IP20
• Mounting of display: built-in / wall installation
• Mounting of switchbox: built-on / wall mounting
• Number of zones: 3
• Number of Infra's per zone: 6
• Temperature range: 2...40°C per 0,5°C.
• Operating options: Auto, continuous day, continuous night or continuous off
• Day-/night temperature monitoring with reading of the actual room temperature on the display
• Automatic switching between summer/winter time.
• Control: on/off, high/low or modulating
Warning!
EN
3