General Safety Rules - Black+Decker BDINF20 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardous situation.
Battery Tool Use and Care
x ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
y ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
z ) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws, or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
aa ) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
SAVE THESE INSTRUCTIONS

WARNINGS:
1 . Read these instructions.
2 . Keep these instructions.
3 . Heed all warnings.
4 . Follow all instructions.
5 . Do not use this apparatus near water. Keep the case dry
at all times.
6 . Clean only with dry cloth.
7 . Do not block any ventilation openings. Install in
accordance with the manuafacturer's instructions.
8 . Do not place near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers)
that produce heat.
9 . Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 . Protect the cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 . Only use attachments / accessories specified by
the manufacturer.
12 . Unplug unit when lightning is in the area or when unit is
not in use.
13 . Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
14 . Do not expose to dripping or splashing. WARNING: To
reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
15 . Do not operate near flammable materials, fumes or gases.
16 . Do not disassemble product, no user serviceable parts. Incorrect
reassembly may result in a risk of electric shock or fire..
17 . Provide adequate ventilation and refrain from placing
items on or around the product during operation.
18 . Do not incinerate the battery even if it is severely damaged or
is completely worn out. The battery can explode in a fire. Check
with local codes for possible special disposal instructions.
19 . If any leakage of liquid from the battery cells occurs,
discontinue use immediately and return the battery to
your local BLACK+DECKER Service Center or authorized
service facility.
20 . Never attempt to open the battery for any reason. If
the plastic housing of the battery breaks or cracks,
immediately discontinue use and do not recharge.
21 . Keep this product out of the reach of children.
22 . Since the vibration produced by the inflator may cause it
to "walk", do not operate on a high shelf or other surface.
Operate at ground or bench level only.

GENERAL SAFETY RULES

KEEP WORK AREA CLEAN. Cluttered areas and benches
invite injuries.
CONSIDER WORK AREA ENVIRONMENT. Don't expose
power tools to rain.Don't use power tools in damp or
wet locations. Keep work area well lit. Do not use tool in
presence of flammable liquids, dust, or gases.
GUARD AGAINST ELECTRIC SHOCK. Prevent body
contact with grounded surfaces. For example; pipes,
radiators, ranges, and refrigerator enclosures.
KEEP CHILDREN AWAY. Do not let visitors contact tool
or extension cord.All visitors should be kept away from
work area.
STORE IDLE TOOLS. When not in use,tools should be
stored in dry, and high or locked-up place — out of reach
of children.
DON'T FORCE TOOL. It will do the job better and safer at
the rate for which it was intended.
USE RIGHT TOOL. Don't force small tool or attachment to
do the job of a heavy-duty tool. Don't use tool for purpose
not intended.
DRESS PROPERLY. Do not wear loose clothing o rjewelry.
They can be caught in moving parts. Rubber gloves and non-
skid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
English
3

Publicité

Table des Matières
loading

Table des Matières