Initial Setup; Auto Tuner Setup - JVC AV-20420 Manuel D'instructions

Auto Tuner Setup

If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please
skip ahead to "Channel Summary" to continue setting up your television.
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing
the active ones and skipping over blank ones or channels with weak signals. This means when
you scan (using the C
Press the M
To AUTO TUNER SETUP
π †
è
To operate
è
To choose CABLE or AIR
To move to START
π †
è
To start Auto Tuner Setup
• Noise Muting will not work during Auto Tuner Setup.
Note:
• Some cable systems experience interference from radio frequencies on cable Channel 95.
You may delete this channel from your scan by removing the "X" next to it on the Channel
Summary screen shown on the next page.
+/– buttons) you will receive only clear, active channels.
HANNEL
button
ENU

Initial Setup

NOW
PROGRAMMING !
48
Programming will take approximately
1 to 2 minutes.
PROGRAMMING OVER!
17