Maintenance And Cleaning; Service; Disposal - Tefcold SSF150 Mode D'emploi

Maintenance and cleaning

Switch the freezer off at the socket.
The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet with a light
soap solution and subsequently wipe dry. Stainless steel surfaces can be maintained using steel oil.
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the surfaces and the
internal cooling system.
Clean the condenser and the compressor compartment using a vacuum cleaner and a stiff brush.
Do NOT hose the compressor compartment with water as this can cause short circuits and damage on the
electrical parts.

Service

The cooling system is a hermetically sealed system and does not require supervision, only cleaning.
If the cabinet fails to cool, check if the reason is a power cut.
If you cannot locate the reason to the failure of the cabinet, please contact your supplier. Please inform
model and serial number of the cabinet. You can find this information on the rating label which is placed
inside the cabinet in the top right hand side.

Disposal

Disposal of the cabinet must take place in an environmentally correct way. Please note existing regulation
on disposal. There may be special requirements and conditions which must be observed.
13