Sensor Maintenance - Eaton Metalux WaveLinx Instructions D'installation

Installation Instructions – Industrial WaveLinx Integrated Sensor

Sensor Maintenance

Sensor Replacement
1. Rotate sensor counter clockwise. (Figure 1.)
Figure 1.
2. Remove sensor from receptacle. (Figure 2.)
Turn Clockwise
Figure 2.
3. To install, insert sensor and rotate clockwise until
detent felt. (Figure 3.)
Figure 3.
2
EATON IB507018EN
All manuals and user guides at all-guides.com
Turn Counter Clockwise
Installation instructions
Occupancy Mask Replacement
1. Locate slot on sensor. (Figure 4.)
Use Slot to
Remove Top
Figure 4.
2. Use tool in slot to remove sensor cap. (Figure 5.)
Figure 5.
3. Place mask over lens and reinstall sensor cap using the
slots for alignment. (Figure 6.)
Place Mask Over
PIR Lens
Figure 6.
Line up Slots
to Reinstall