Télécharger Imprimer la page

Eaton Metalux MS Série Instructions D'installation

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

ADF140678
Installation Instructions – Standard Highbay Motion Sensor (MS)
Instructions d'installation – Détecteur de mouvements standard
Highbay (MS)
Instrucciones de instalación – Para el sensor de movimiento (SM)
Highbay estándar
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a person
familiar with the construction and operation of the
product and the hazards involved. Cooper Lighting
assumes no responsibility for claims brought about
by improper or careless installation or handling of this
product.
WARNING
Risk of Fire and Electric shock. If not qualified, consult
an electrician.
CAUTION
Edges May Cut. Handle with care.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION: Receiving Department; Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
NOTICE: Green ground screw provided in proper location.
Do not relocate.
NOTICE: Lamps contain mercury, dispose according to
local, state, or federal laws.
NOTICE: If supply wires are located within 3 inches of
ballast, use wire rated for at least 90°C (194°F).
NOTICE: Minimum 90°C supply conductors.
Brand Logo
reversed out of
black
INS #
INS #

Publicité

loading

Sommaire des Matières pour Eaton Metalux MS Série

  • Page 1 Brand Logo reversed out of black ADF140678 INS # INS # Installation Instructions – Standard Highbay Motion Sensor (MS) Instructions d’installation – Détecteur de mouvements standard Highbay (MS) Instrucciones de instalación – Para el sensor de movimiento (SM) Highbay estándar WARNING CAUTION Risk of burn.
  • Page 2 Rotate motion sensor reading surface (LENS) so that it is parallel with floor. (Figure 2.) Push motion sensor forward to lock sensor into position. Fixture Screws (pre-installed) Motion Sensor and Bracket Assembly Figure 1. Motion Sensor Reading Surface Figure 2. EATON ADF140678 Installation instructions...
  • Page 3: Important

    à la réception. Remplissez une réclamation pour le transporteur public (chargement partiel) directement avec celui-ci. Les réclamations pour dommages cachés doivent être faites dans les 15 jours suivant la réception. Tout le matériel endommagé et l’emballage original doivent être conservés. EATON Instructions d’installation ADF140678...
  • Page 4 (Figure 2.) Poussez le détecteur de mouvements vers l’avant pour qu’il s’enclenche. Luminaire Vis (préinstallées) Détecteur de mouvements et assemblage du support Figure 1. Surface de lecture du détecteur de mouvements Figure 2. EATON Instructions d’installation ADF140678...
  • Page 5 Presente el reclamo directamente al transportista de carga (LTL). Los reclamos por daños ocultos deben presentarse dentro de los 15 días posteriores a la entrega del producto. Se debe guardar todo el material dañado, junto con el embalaje original. EATON Instrucciones de instalación ADF140678...
  • Page 6 (Figura 2.) Empuje el sensor de movimiento hacia adelante para bloquearlo en su posición. Luminaria Tornillos (preinstalados) Sensor de movimiento y unidad de soporte Figura 1. Superficie de lectura del sensor de movimiento Figura 2. EATON Instrucciones de instalación ADF140678...
  • Page 8 Warranties and Limitation of Liability Please refer to www.eaton.com/LightingWarrantyTerms for our terms and conditions. Garanties et limitation de responsabilité Veuillez consulter le site www.eaton.com/LightingWarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.eaton.com/LightingWarrantyTerms para conocer nuestros términos y condiciones.