Terminals - IMAGO Ksenia KSI6300000.3 Serie Guide D'installation

Always use a shielded cable with an end of the shield connected to the ground of the alarm station and the
other one kept free. In the following figure 4 two connection examples are shown, the first one (a), the simplest,
with the external power supply of the siren and the tamper management with end line resistance (10k), the
second one (b), which uses the siren programmable inputs [AL] and [LI] by means of open collector outputs
[O1] and [O2] of the Control Panel. Moreover the failure output [F] is connected to a zone input [i1] of the
alarm station (i.e. to program an action as the activation of a vocal call or SMS or e-mail with a "Battery failure"
message).
ALARM STATION
imago
Power positive 13,8Vdc
+R
Tamper 24hr balanced 10KΩ
M4
Open Collector 2 output
O2
N.B.
The terminals names refer to Ksenia Control Panel series lares. The imago Universal siren can interface any Intrusion Control Panel having
terminals with same functions.
PART NUMBER
KSI6300000.317
KSI6300000.318
KSI6300000.319
KSI6300000.337
KSI6300000.338
KSI6300000.339
KSI6301000.317
KSI6301000.318
KSI6301000.319
KSI6301000.337
KSI6301000.338
KSI6301000.339
KSI6901000.340
KSI6901000.350
KSI6901000.360
KSI6901000.370
14
All manuals and user guides at all-guides.com
TERMINALS - UNIVERSAL VERSION IMAGO ONLY
ALARM STATION
imago
TERMINALS DESCRIPTION
Universal Siren - color white with transparent orange bottom
Universal Siren - color white with transparent red bottom
Universal Siren - color white with transparent blue bottom
Universal Siren - color silver grey metallized with transparent orange bottom
Universal Siren - color silver grey metallized with transparent red bottom
Universal Siren - color silver grey metallized with transparent blue bottom
Siren for KS-BUS - color white with transparent orange bottom
Siren for KS-BUS - color white with transparent red bottom
Siren for KS-BUS - color white with transparent blue bottom
Siren for KS-BUS - color silver grey metallized with transparent orange bottom
Siren for KS-BUS - color silver grey metallized with transparent red bottom
Siren for KS-BUS - color silver grey metallized with transparent blue bottom
The 13,8V voltage of the terminals [+] and
[-] of the siren, keeps the backup battery
charged and provides a protection
against cables cut.
If the alarm station doesn't have open
collector outputs, relay free exchange of
the alarm station can be used to simulate
the required voltage (start with positive)
on the input terminal of the imago siren.
Example: There's the need to have
the siren LED blinking when an event
scheduled by the alarm station and
associated to a relay occurs. The name
shown by the terminals are:
[C] Common
[NA] Normally open
[NC] Normally closed
The connection that must be set is shown
in the following figure.
-
O1
i1
DESCRIPTION
Siren Cover in Beige color
Siren Cover in Olive Green color
Siren Cover in light Copper Brown
Siren Cover in Blu/Grey color
imago
quick installation guide
ALARM STATION
imago
Power negative
Open Collector 1 output
Zone input