Troubleshooting - Harbor Freight Tools PACIFIC HYDROSTAR 95672 Instructions D'assemblage Et Mode D'emploi

Be cERTAIn to shut off the Pressure Washer, release all pressure in a safe manner, and
disconnect it from power and water before adjusting, cleaning, or repairing the unit.
Dry self thoroughly
and check the circuit
b r e a k e r o n y o u r
household panel.
check for electrical shorts. If no shorts are
found, reset breaker.
If breaker continues to trip, try another circuit
or contact a certified electrician.
Water leaking from within the housing
Seals or gaskets may be worn or damaged.
If the steps above do not solve the problem or if the repairs involved are too
SKU 95672 For technical questions, please call 1-800-444-3353.
All manuals and user guides at all-guides.com

TROUBLESHOOTIng

IMPORTAnT!
Pressure Washer Stops Suddenly
check the indicator on the gFcI power
plug (explained under Controls and
Features, #2 on page 11).
InDIcATOR
APPEARS RED
BREAkER TRIPPED
Leaking water creates a shock hazard;
promptLy have the unit inspected and
repaired by a qualified technician.
complex, contact a qualified technician.
InDIcATOR nOT
RED
Make sure unit is
totally dry, then
press reset button.
If gFcI continues
to trip, contact a
certified electrician.
BREAkER
nOT TRIPPED
Have the unit inspected
a n d r e p a i r e d b y a
qualified technician.
PAGE 18