Velleman VASH2 Notice D'emploi page 4

Troubleshooting
7.
Power indication LED (2)
flashes
All LEDs are flashing
No image on output
Only image, no sound
Resolution 1080p not
shown
8.
Technical specifications
Resolution
HDMI™ source inputs
HDMI™ output ports
video bandwidth
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of this
device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
00 (02/09/2008)
All manuals and user guides at all-guides.com
VASH2 & VASH3
Switch in input detection mode, normal condition at start-up.
[only for VASH2]
Possibly a connection problem. Check all connections and cabling.
[only for VASH2]
Check all connectors and cabling.
Check the power of the HDMI switcher.
Check whether connectors are securely fit.
Verify whether connection cable supports DVI
Possible High-bandwidth Digital Content Protection (HDCP)
problem, reset HDMI switcher
When an output is connected to the video recorder, the HDMI
switcher will lock up the audio part.
Verify whether the input devices fully support 1080p.
Verify whether the used HDMI cables fully support 1080p
VASH3
480i/480p/720p/1080i/1080p
2
1
165MHz
188mm (W) x 80mm (D) x 32mm (H)
4
5V/1000mA (PSU incl.)
260g
VASH2
4
1
225MHz