Makita DCU180 Manuel D'instruction page 7

ASSEMBLY
CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before carrying out any work on the machine.
Assembling main unit
1. Take out the base unit and handles from the box.
NOTICE:
Be sure to take out the base unit and
handles together, so that excessive force is not
applied to the cords.
2.
Place the packing material under the rear side of
the base unit.
► 1. Packing material
3. Insert the rear wheels into the frame.
► 1. Rear wheel
► 1. Rear wheel
NOTE: The support legs can be attached instead of
the rear wheels.
4. Attach the spring washer and the washer to the
short hexagonal bolt, and then tighten them using the
wrench included in the package.
1
► 1. Short hexagonal bolt 2. Spring washer 3. Washer
NOTICE:
1 bolts to tighten the rear wheels.
NOTICE:
on both sides.
7 ENGLISH
1 2
Be sure to use the short hexagonal
Fix the rear wheels at the same position
1
3