Manual Defrost; Tips For The User - Bartscher 700.455 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setting desired values
To regulate and set desired values:
press
to raise or lower value, press
confirm new value by pressing

Manual defrost

Besides automatic defrost, manual defrost is available to be activated by pressing
3 seconds.
NOTE!
To gain access to additional settings or to change parameters, such settings are
located in the temperature settings guide. If not, contact service personnel.

Tips for the user

Keep food products and beverages in hermetically-sealed containers in order to protect
their aroma and prevent mixing of scents in the refrigerator.
When placing articles inside the refrigerator, remember to keep sufficient distance
between food products and the device's internal walls to allow sufficient air circulation.
More energy is used and damage to the device is more common when larger amounts
of products are stored, or when the door is held open for longer periods of time.
To reduce loss of cold, keep the door open for as short a time as possible. Also, do not
open the door too frequently.
To avoid unpleasant odours inside the refrigerator, observe best-by dates on food
products.
Cool food products and beverages to the appropriate storage temperature prior to
putting in the refrigerator.
Storage of uncooled food products reduces the device's effectiveness and may cause
such articles to spoil faster. Avoid storing food products in uncooled spaces, to prevent
loss of cold air when storing articles in the refrigerator.
- 32 -
for one second: set value will begin flashing;
or
;
.
for over

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

700.485

Table des Matières