Features; Charging The Internal Battery Of The Instant Power - Schumacher Electric INSTANT POWER XPF2260 Manuel D'utilisation

Masquer les pouces Voir aussi pour INSTANT POWER XPF2260:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. FEATURES

4
3
2
1

4. CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER

IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH
USE AND EVERY 30 DAYS, TO KEEP
THE INSTANT POWER'S INTERNAL
BATTERY FULLY CHARGED AND
PROLONG BATTERY LIFE.
CHECKING THE LEVEL
OF THE INTERNAL BATTERY
Check the internal battery's charge level
by pressing the Display Button. The Digital
Display will show the battery's percent of
charge. Charge the internal battery if the
display shows it is under 100%.
NOTE: The internal battery's percent
of charge is most accurate when the
Instant Power has been disconnected
from all devices and charging sources
for a few hours.
CHARGING THE INTERNAL BATTERY
Charge the internal battery for the Instant
Power using an extension cord (not
included).
NOTE: Use of an improper extension
cord could result in a risk of fire and
electric shock.
All manuals and user guides at all-guides.com
10
9
8
7
6
5
14
15
18
11
1. Compressor gauge
12
2. Compressor/inflator switch
3. Inflator port
13
4. Deflator port
5. 12 Volt DC outlets
6. USB port
7. Jump start/USB On/Off switch
8. Digital display
9. Built-in work light
16
10. Display button
11. Work light On/Off switch
12. Converter On/Off switch
13. 120 Volt AC outlets
14. Charger port
15. Compressor hose
16. Battery clamps
17
17. Adapters
18. Inflator hose
1. To charge, plug an extension cord into
the charger port on the back of the
jump starter.
2. Plug the extension cord into a 120VAC
electrical wall outlet. While the jump
starter is connected to an AC outlet, the
green LED on the back of the unit will
be on.
3. Monitor the progress of the charge by
pressing the display button on the front
of the unit. When the internal battery is
fully charged, the display will show 100.
Complete charging may take up to 72
hours. The jump starter is then ready
to use.
4. When fully charged, the charger will
automatically go into maintain mode
and maintain the battery at full charge
without damaging it.
5. Charge the jump starter as soon as
possible after use.
4

Publicité

Table des Matières
loading

Table des Matières