Remote Control - Laufen CLEANET RIVA Notice Abrégée

CONTROLLER WITH ROTARY BUTTON
The following functions can be
activated using the controller:
User profile selection
Starting and stopping
the shower
Shower intensity
Shower arm position

REMOTE CONTROL

Activate the touch screen remote control by pressing the start button at the top right. When the remote
control is activated for the first time, a setup program guides you through the most important settings.
The installer may have already commissioned the WC after installation. As soon as you sit on the shower
toilet, the appliance can be operated using the rotary button or remote control.
using the rotary button or remote control.
Black symbol
White symbol
16
Controller Description
You can select 4 stored user profiles by turning the controller.
One indent forward selects user profile 1. The second indent
selects user profile 2, etc. One indent back reduces the
user profile by one in each case. If you do not select a user
profile, the basic profile is activated automatically.
While you are sitting on the shower toilet, briefly press the
rotary button on the right side to start the rear shower. Press the
separate button underneath the rotary button to start the lady
shower.A further press stops showering prematurely.
One turn forwards increases the jet intensity during the rear
and lady shower. One turn back reduces the shower intensity.
The position of the shower arm can be changed by pressing the
controller and simultaneously turning it forwards or backwards.
The shower arm follows the direction of rotation.
Remote Description
Function is inactive /not in use.
Function is active /in use.
Controller
with rotary
button