Uk - Product Information; Construction And Design; Main Components - exodraft RSVG Serie Instructions

3000127 RSVG DK DE NO SE UK NL FR 20200511
1. UK – Product information
The exodraft RSVG type chimney fan is supplied with accessories pack including location brackets,
armoured cable, safety wire and a mineral wool mat, as well as packing to ensure the fan does not
vibrate. (Two wing screws are also included, to be used where conditions allow).
Warning!
1.1

Construction and design

The body and casing are manufactured in cast aluminium, the RSVG chimney fan is designed with
a centrifugal impeller for vertical discharge. The chimney fan has a
builtin fail-safe system consisting of a pressure differential switch (PDS) and two pressure sensors.
It is available in three sizes: the RSVG 200, 250 and 315.
Drainage holes have been built into the base plate of the RSVG. The chimney fan can be opened for
servicing and cleaning purposes.

Main components

The RSVG has the following main components:
Pos.
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
Weight
• All installations must be carried out by competent personnel in accordance with
national laws and regulations
• Ensure that the chimney has been swept before mounting the fan
• The chimney fan should always be switched on when the fireplace or boiler is in use.
Part
Top section
Bottom section
Motor
Centrifugal impeller
Inlet ring
Hinges
Safety mesh
Handle
Armoured cable and connecting cable
Mineral wool mat
Safety wire with screw and rawl plug
Location bracket, bolt and nuts
Pressure differential switch
Fixed air pressure sensors
Screws to secure top and bottom section.
Alternatively, use supplied wing screws
where conditions allow.
Fan type
RSVG200-4-1
RSVG250-4-1
RSVG315-4-1
o
Weight
18 kg
27 kg
38 kg
3