Led Indicators - AIPTEK MobileCinema A50P Guide De L'utilisateur

User's Manual
Charging the product
Connect one end of the bundled
USB cable to the Micro USB port
of the product and the other end to
PC / Notebook or Smart phone
USB power adapter for charging.
* After 5 hours the projector is
fully charged, the LED light will
be turned off.
Charging your MHL enabled phone
The internal battery of the projector can not only be used for projection, but
also charge your MHL enabled mobile device.
1. Please turn off projector before
charging MHL enabled phone.
2. Plug MHL cable into MHL port
of your mobile phone.
3. Press the charging mode
button to start charging.
Only MHL enabled devices can
be charged via the embedded
battery of the projector.
Please press charging button after
finishing MHL phone charge.

LED indicators

LED Status
3 white LEDs stay on
2 white LEDs stay on
1 white LED stays on
1 white LED blinks
LED Marquee
3 white LEDs blink
1.
2.
Indication
Power capacity is between 80% to 100%
Power capacity is between 45% to 80%
Power capacity is between 10% to 45%
Power capacity is below 10%
Projector is being charged
Charging MHL enabled mobile phone
2
or