Invertek SHT 500 Manuel D'utilisation page 21

SAFETY WARNINGS
the power tool accidentally.
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment
or obstruction of moving parts, breakage of
parts and any other condition that may affect
the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to become jammed and are easier to con-
trol.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions, ta-
king into account the working conditions and
the work to be performed. Using the power tool
for operations other than those intended could re-
sult in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified re-
pair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
ELECTRIC HEDGE TRIMMER
SAFETY WARNINGS
WARNING!
The safety rules must be
observed during machine use. Before starting the
machine, read the instructions regarding personal
safety and the safety of unauthorized persons.
Keep the instructions in a good state for future use.
– Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold ma-
terial to be cut when blades are moving. Make
sure the switch is off when clearing jammed ma-
terial. A moment of inattention while operating the
hedge trimmer may result in serious personal injury.
– Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or stor-
ing the hedge trimmer always fit the cutting de-
vice guard. Proper handling of the hedge trimmer
will reduce possible personal injury from the cutter
blades.
– Hold the power tool by insulated gripping sur-
faces only, because the cutter blade may come
in contact hidden wiring or its own cord. Cutter
blades contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
– Keep cable away from cutting area. During op-
eration the cable may be hidden in shrubs and can
be accidentally cut by the blade.
All manuals and user guides at all-guides.com
• How to use the electric hedge trimmer
When using the machine, always use caution and take
on a firm and well-balanced position.
– Where possible, avoid working on wet, slippery
– Never run, but walk carefully paying attention to the
– Assess the potential risks of the ground to be mown
Do not use the machine if you are unable to hold it with
both hands or keep it steady on your legs while work-
ing.
Never allow children or persons unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of the user.
The machine must never be used by more than one per-
son.
Never use the machine:
– when people, especially children or pets are in the
– if the user is tired or unwell, or has taken medicine,
– if the guards are damaged or have been removed.
• Techniques for using the electric hedge
Always observe the safety regulations and use the most
suitable cutting techniques (see chapter 7 for in-
structions and examples).
• Handling the electric hedge trimmer safely
Whenever the machine is to be handled or transported
you must:
– turn off the motor, wait for the cutting device to stop
– only hold the machine using the handgrips and po-
When using a vehicle to transport the machine, posi-
tion it so that it can cause no danger to persons and fas-
ten it firmly.
• Recommendations for first-time users
Before tackling a job for the first time, it is advisable to
gain the necessary familiarity with the machine and the
most suitable techniques, finding out how to firmly grip
the machine and perform the movements required by
this particular job.
ground or in any case on uneven or steep ground that
does not guarantee stability for the operator.
lay of the land and any eventual obstacles.
and take all necessary precautions to ensure your
own safety, especially on slopes or on bumpy, slip-
pery or unstable ground.
vicinity;
drugs, alcohol or any substances which may slow his
reflexes and compromise his judgement;
trimmer
and unplug the machine from the mains;
sition the cutting device in the opposite direction to
that used during operation.
5
EN