Important Safety Information - Greenlee LHFS-210003 Mode D'emploi

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating
or servicing this tool.
Failure to observe this warning can
result in severe injury or death.
Greenlee Tools, Inc.
SAFETY
ALERT
SYMBOL
Electric Shock Hazard:
• When using any 48520 pruner
near energized electrical lines,
use only certified non-conductive
hoses and proper personal protec-
tive equipment.
• Keep the fiberglass extension
of the 48520 clean and dry.
Accumulated oil or dirt reduce the
insulating properties of the tool.
• Do not use any of the LHFS-
210003 pruners near energized
electrical lines.
Failure to observe this warning can
result in severe injury or death.
Skin injection hazard:
• Do not use hands to check for
leaks.
• Do not hold hose or couplers
while the hydraulic system is
pressurized.
• Depressurize the hydraulic system
before servicing.
Oil under pressure easily punc-
tures skin, causing serious injury,
gangrene, or death. If you are
injured by escaping oil, seek medical
attention immediately.
Wear a hard hat when using this
tool.
Failure to observe this warning can
result in severe injury or death.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Hydraulic Pruners