Prior To Use; How To Order - F2 FULTON Mode D'emploi

- Inspect strap and replace if damaged.
- Check mounting hardware for proper tightness and re-torque if necessary.
- Gears, ratchet contact points and shaft bushings must be kept lubricated with a thin oil or grease.
Strap Under Drum
Engaged
Neutral
The F2 winch is designed with precision fit components and corrosion resistant materials to minimize the frequency of maintenance. Occasional cleaning
with mild soap and water along with light oil lubrication of contact points will prolong peak performance and appearance
Use only Cequent Performance Products' parts or parts of equal quality for repair. Replacement parts are available through Cequent Performance Products'
Customer Service Department, 1-800-632-3290. Please specify product model number.
Limited Lifetime Warranty ("Warranty"). Cequent Trailer Products, Inc. ("We" or "Us") warrants to the original consumer purchaser only ("You") that the product will
be free from material defects in both material and workmanship, ordinary wear and tear excepted; provided that installation and use of the product is in accordance with
product instructions. There are no other warranties, express or implied, including the warranty of merchantability or fitness for a particular purpose. This warranty is
not transferable.
Limitations on the Warranty. This Warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a result of any accident or in any
other manner; (c) damage from misapplication, overloading, or improper installation; (d) improper maintenance and repair; and (e) product alteration in any manner by
anyone other than Us, with the sole exception of alterations made pursuant to product instructions and in a workmanlike manner.
Obligations of Purchaser. To make a Warranty claim, contact Us at 47912 Halyard Dr. Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product by model
number, and follow the claim instructions that will be provided. Any returned product that is replaced by Us becomes our property. You will be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You are the original consumer purchaser. The product and the purchase receipt
must be provided to Us in order to process Your Warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this Warranty. We shall not be liable for service or labor charges incurred in removing or replacing a
product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product instructions is at Your own
risk.
Governing Law. This Warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This Warranty is governed by the laws
of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located in Oakland County, Michigan shall have exclusive jurisdiction
for any disputes relating to this Warranty.
We declare under our sole responsibility that the F2 Trailer Winch is in conformity
with EN-12100-2:2003 Safety Machinery; Machinery Directive 98/37/EC.

Prior to Use

Operation
Let Line/Load Out:
Before turning the handle, firmly grip the winch handle and disengage
the ratchet plunger or engage it in the reverse direction. You may have
to take in a small amount of strap to allow the ratchet plunger to
unload. With a firm grip on the winch handle, slowly let out strap. If
you must stop before the load is fully out, be sure the ratchet plunger is
engaged in the forward or loading position and gradually release the
winch handle to be sure the ratchet plunger is holding the load.
Take Line/Load In:
Be sure the ratchet plunger is engaged in the forward or loading
position. As you turn the handle, make sure the strap is winding onto
the drum properly. If you must stop before the load is fully in, be sure
the ratchet plunger is engaged and gradually release the winch handle
to be sure the ratchet plunger is holding the load.
Shifting (2-Speed Winches Only):
Make sure the ratchet plunger is properly engaged and holding the load
before attempting to change gears. Firmly grasp the crank arm of the
F2 2-speed winch where it attaches to the input shaft. Push/pull to
shift. In for High-Gear and out for Low-Gear.
Ratchet
Plunger
Disengaged
Not holding load!
Maintenance

How to Order

Limited Lifetime Warranty
Grasp handle here
and push/pull to shift
Disengaged
Not holding load!
Cequent Performance Products, Inc.
Strap Over Drum
Engaged
Neutral
47912 Halyard Dr. Suite 100
Plymouth, MI 48170 USA
800/632-3290
www.cequentgroup.com