Mounting The Profile Plate And The Control Console; Cable Connections - Festo MPS 8038623 Notice D'utilisation

Measuring station

11.2 Mounting the profile plate and the control console

11.3 Cable connections

40
1 Profile plate
2 Hammer head nut, M6-32 (4 ea.)
3 Trolley
4 Serrated washer, J6.4 (4 ea.)
5 Washer, B-6.4 (4 ea.)
6 Socket head screw, M6x10 (4 ea.)
7 Sheet metal screw, 3.5x9 (2 ea.)
8 Control console
PLC board to station
1
If the SysLink 19" system plug module
is used: connect socket A to the SysLink
socket on the C interface using a
SysLink cable or the SysLink socket at
the station's digital I/O terminal.
PLC board to control console
2
If the SysLink 19" system plug module
is used: connect socket B to the SysLink
socket on the control console using a
SysLink cable.
PLC board to power supply unit
Insert the 4 mm safety plug into the
socket on the power supply unit.
PC to PLC
Connect your PC to the PLC via a
programming cable.
© Festo Didactic 8103339