Foppapedretti Hopla Notice De Montage page 13

All manuals and user guides at all-guides.com
F
B C
V V
click!
H
I click!
• ENGLISH •
ASSEMBLY
3.
Lift up the central joint, ensuring that it
is attached correctly. The joint "F" must
be in a horizontal position.
IMPORTANT
"F" is securely locked by checking that
the frame does not bend when pushed
downwards.
4.
Assemble the tubes "B" and "C",
joining them together in the middle.
Press the pin G to allow them to attach
and slot the pin into the hole H.
G
IMPORTANT: The components are
correctly assembled when the metal
pins are locked into the holes on the
tubes, a "click" will indicate that they
have locked in successfully.
5.
Insert the tube into the fabric, as shown
in the figure, and then slot the metal pin
into the hole, by pressing down the pin
"I". Repeat this process on the opposite
side.
click!
13
: Make sure that the joint
I
IMPORTANT
: Make sure that
the metal pin is correctly locked
in its hole, a "click" will indicate
that it has locked in successfully.