Safety - L-TEC IONSTAR Notice D'utilisation

Safety

3.
All and any tasks undertaken, may only be carried out by persons who are
authorized by the responsible person / operator.
The user must...
 be familiar with the handling of compressed air equipment
 have read and understood the opera ting instructions
The IONSTAR ionization device contains no parts which may be repaired by the
operator. Unauthorized changes to the device are prohibited for safety reasons.
Damage to the IONSTAR may result in electric shock.
The ionisation device must be taken out of operation immediately in case of
visible damage.
CAUTION!
The ionization device generates high voltage. If liquids enter the IONSTAR a short
circuit may be caused.
 Never operate the ionizer with wet hands
 If the device has been wetted with liquids, it must be cleaned and allowed
to dry accordingly
WARNING!
Moisture and dampness can cause spark discharge (arc-over) making it possible
to cause damage and short-circuit within ionization device.
The IONSTAR must be protected from moisture and damp

CAUTION!
Short-circuit currents and short-circuit sparking, resulting from moisture, damp
or dirt, can cause an already present explosive atmosphere to ignite
The IONSTAR must be protected from moisture and damp

Check the device regularly for dirt and contamination

If arcing (flashover) occurs, take the device out of operation immediately

All manuals and user guides at all-guides.com
Seite 15 von 30