Epson PowerLite X15 Guide Rapide

PowerLite X15
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
Choose from the following connections. See the sections below or the User's
Guide on your projector CD for details.
Computer
USB port
Connect the square end of a USB cable to the projector's
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Windows 2000 SP4 or later: After turning on the projector, follow the
®
on-screen instructions to install the EPSON
(EMP_UDSE.EXE; only on first connection). If the software screen does not
display automatically, open My Computer or Computer, then double-click
EPSON_PJ_UD.
Mac OS ® X 10.5.1 or higher: After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the EPSON USB Display software
(only on first connection).
Monitor port
Connect one end of a VGA cable to the projector's Computer1 or Computer2
port, and the other end to your computer's
a laptop, switch it to external display (see "Troubleshooting"). You can also
connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Note: To connect a Mac that includes only a Mini DisplayPort or Mini-DVI
®
port for video output, you need to obtain an adapter that allows you to
connect to the projector's HDMI port. Contact Apple
options. Older Mac computers (2009 and earlier) may not support audio
through the HDMI port.
Video device
Connect up to 5 video devices and press the Source Search button on the
projector or remote control to cycle through them.
External speaker
You can also connect external speakers to your projector to enhance your
presentations. See the User's Guide on your projector CD for details
*412281400*
*412281400*
USB cable
HDMI cable
VGA cable
USB TypeB
USB Display software
®
monitor port. If you are using
for compatible adapter
®
S-Video cable
HDMI cable
Component video to VGA cable
Audio cable
RCA video cable (composite video)
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
The power light on the
projector turns orange.
3
Open the A/V Mute slide all the way.
4
Press the power button on the
projector or remote control. The
projector beeps, and the power light
flashes green and then stays on.
Note: To shut down the projector,
press the power button twice, then
unplug it. You don't have to wait for the
projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the menu
system.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see the
troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the zoom ring to enlarge or reduce the image.