AEG EC 4836 Mode D'emploi page 38

All manuals and user guides at all-guides.com
English
38
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-en-
abled device. The functional radius is limited to approx. 15
metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profi le (Advanced
Audio Distribution Profi le) and has a music-player function,
then you can also wirelessly transfer music to the device.
The A2DP profi le involves a multi-vendor Bluetooth profi le.
By streaming, stereo-audio signals are wirelessly transferred
between the playing device (source) and the receiving
device. To be able to remotely control the source, the play-
back device must support the AVRCP profi le (Audio Video
Remote Control Profi le.
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on Devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e. g. mobile phone). For this, refer to the operation
manual of your player.
2. Select the BLUETOOTH mode using the FUNCTION /
button. The control lamp
appears in the display. This signalizes that the device is in
pairing mode.
3. Choose the Bluetooth menu in your player and register the
device in your player. For this, refer to the operation man-
ual of your player. The device "AEG EC 4836" will show in
your player as a selection.
NOTE:
• Only one playback device can be connected with
the device at one time. If the device is already
connected with another playback device, the device
will not appear in the BT selection menu.
• Press the / / SCAN button to disconnect an
existing Bluetooth connection. The
(2) fl ashes blue.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
After successful pairing, the
blue. "CONNECT" appears in the display. For the further
procedure, please refer to the user manual of the playback
unit. If possible, adjust the volume of the external unit to a
comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect
the devices.
EC4836_IM
(2) will blink blue. "PAIRING"
control lamp
control lamp (2) lights up
NOTE:
• In case of problems with the registration of a replay
device, deactivate the WiFi- / and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e. g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. However,
the sound is not played back by the device. After you
have ended the call, the devices are connected to each
other again and playback continues.
Playing Music via USB
This device has been developed in line with the latest tech-
nical advances in the USB fi eld. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back fi les from USB
storage devices. This is not a malfunction of the device. Only
use commercially available USB sticks.
1. Press the FUNCTION / button repeatedly until "USB – 1
or USB – 2" is shown on the display.
2. Connect a USB storage device directly into the port. After
that, " – READING – " appears in the display. Playback will
automatically start after a few seconds.
For operation, please refer to the section "Description of the
control buttons".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB ports are not designed for charging external
devices.
• Please note: The USB ports are only intended for
playing music from USB sticks. It only provides a low
power (100 mA) power supply. Those USB ports are not
suitable for using external 2.5" hard drives with start-up
currents of up to 1100 mA. In order to play music from
your smartphone, iPod or iPhone, connect the desig-
nated AUX IN socket.
03.08.16