Honeywell Prestige M28798 Guide D'installation page 9

4
Link wireless accessories to thermostat (optional)
Wireless Device
MENU
HELP
Manager
Add Device
View Connected Devices
Note: If you are installing more than one thermostat, repeat steps above and on page 10 for
each thermostat.
If you are installing multiple thermostats, you must press
mode at each thermostat before linking wireless accessories to the next thermostat.
Press MENU.
MENU
MCR28801
Press
MENU
INSTALLER OPTIONS. Enter security code
when prompted.
Security code is the thermostat date code
(printed on back of wallplate). Or press
MENU > EQUIPMENT STATUS to find code.
MCR29862
Press
WRELESS DEVICE MANAGER.
MCR28802
Press ADD DEVICE to start timer, then press
buttons on wireless accessories to link
them to the thermostat (see next page).
Timer will re-set to 15 minutes after each
accessory is linked. Thermostat will exit
link mode after 15 minutes if there is no
activity.
Press VIEW CONNECTED DEVICES to verify
that all wireless accessories have been
linked to the thermostat.
MCR28804
Press DONE when finished.
9
to scroll down, then press
t
to scroll down, then press
t
to exit "Add Device"
DONE
69-2057EFS—03