Switching The Airflo 24 'On' & 'Off; Positioning The Patient On The Eagle; Operating - winncare MANGAR Mode D'emploi

B
A
Switching the Airflo 24 'On' & 'Off' - fig.
• To switch on, momentarily press the 'Power'
button (A fig.4). The bottom battery status
indicator light (B) will come on.
• To switch off, momentarily press the 'Power'
button. The bottom battery status indicator light
4
will go out.
Positioning the patient on the Eagle - fig.
• Position the Eagle at the side of the patient so that
the patient's shoulders are level with the Eagle
badge. NOTE: Place a blanket, groundsheet, towel
5
or similar under the Eagle if using it on a rough
surface.
• Transfer the patient onto the Eagle. The shoulders
should lie on the Eagle badge and the body should
lie centrally.

Operating

The following instructions apply equally when
the Eagle is being operated by a person raising
6
themselves without assistance, or by an assistant
raising a patient.
WARNING: If a slide sheet has been used to transfer
the patient onto the Eagle it must be removed from
under the patient before commencing a lift.
• Switch the Airflo 24 to 'On'. Press the number
1 button on the hand control to partially inflate
the backrest section until the patient is in a
comfortable position - fig. 6
• Press the number 2 button to inflate the bottom
section until it becomes rigid - fig. 7
7
4
5
EAGLE
ENGLISH
5