Koenic KHT 200 Mode D'emploi page 20

English
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot be
solved as indicated under Solution, please contact your manufacturer.
Problem
Product does not work
LED indicator does not light on
during charging batteries
Clipper head is not working
smoothly
20
IM_KHT200_150617_V04_HR.indb 20
All manuals and user guides at all-guides.com
Possible causes
• Interrupted power supply
• Batteries empty
• No power supply
• Power cord is not connected to
product or charging stand
• Device is not correctly put on
the charging stand
• Impurities accumulated on the
Clipper head
Solution
• Check the power supply
• Re-charge batteries
• Check the power supply
• Check the power cord
connection
• Put product correctly on the
charging stand
• Clean and add 1-2 drops oil
onto the Clipper head
17/6/15 5:06 PM