Belle RANGER 450 Manuel De L'opérateur page 20

The Belle Group Floor Saw is designed to give many years of trouble free operation. It is, however, important that the simple regular
maintenance listed in this section is carried out. It is recommended that an approved Belle Group dealer carries out all major
maintenance and repairs. Always use genuine Belle Group replacement parts, the use of spurious parts may void your warranty.
Before any maintenance is carried out on the machine ensure that the machine has been stopped.
Running In Period
Drive Belt.
engine's position by turning the tension bolts clockwise to increase belt tension, anticlockwise to decrease. Once set, retighten the
engine mount bolts and check the belt tension a second time. Then check the pulley alignment. If the alignment is incorrect, loosen the
taperlock bushes and move the pulley to suit. Once the pulley is aligned, retighten the taperlock bushes. Finally, replace the belt guard
Routine Maintenance
Engine Oil Check Level
Change
Air Filter Check Condition
Clean / Replace
Spark Plug Check / Clean
Drive Belt Tension
Oil / Fuel Type & Quantity - Spark Plug Type
Petrol Honda GX390
Petrol Robin EH41
Diesel Lombardini LD 440
All manuals and user guides at all-guides.com
Service and Maintenance
Oil type Quantity
(Gal)
Refer to Manual 0.40
Fuel Type Capacity
(Gal)
Diesel Refer to
Manual
20
Spark Plug Electrode
Type Gap (in)
N/A N/A