Care And Maintenance - Chicco Lulla Go Notice D'emploi

OPENING THE PRODUCT
rface
1. Remove the frame from the bag and
upper
erect it following the direction of the ar-
mm.
rows (Diag. 1). You will hear a double CLICK
rib to
when the frame has been opened and
locked in place correctly (Diag. 1A).
ment
2. Assemble the 4 legs following the direc-
tion of the arrows (Diag. 2) until they CLICK
e not
into place (Diag. 2A).
3. Place the mattress on the bottom of the
s at a
crib (Diag. 3).
ately,
CLOSING THE PRODUCT
4. Remove the mattress (Diag.4).
ll the
5. Press the buttons on all 4 legs (Diag. 5)
abled;
and slide them out in the direction of the
e use.
arrows (Diag. 5A).
cates
6. Then press the two buttons on the upper
owed.
edge of the crib (Diag. 6) and fold the frame
d ad-
in the direction of the arrows. (Diag. 6A)
o the
7. Place all the components inside the prac-
tical carry bag (Diag. 6B – Diag. 6C) and zip
h the
it closed.
ch of

CARE AND MAINTENANCE

The crib and mattress have hard-wearing
is in-
fabric covers that are completely remov-
able and washable. The covers must be
n one
removed/replaced by adults only. Check
the product regularly for signs of wear and
rface
damage and to ensure that it is assembled
correctly. Should any part be damaged, do
from
not use it and keep it out of reach of chil-
e the
dren. Please refer to the care label for in-
rtains
structions on how to wash the fabrics. Do
choke
not clean the product with solvents, abra-
gula-
sive or harsh products.
cords
within
Hand wash in cold water
etely
Do not bleach
ib.
C
t can
Do not spin-dry
e. Af-
pera-
Do not iron
r the
g the
Do not dry clean
All manuals and user guides at all-guides.com
Check that the fabric and stitching are in
good condition each time you wash it.
WARNING: When removing and/or replac-
ing the cover, handle the fabric with care to
prevent accidentally spoiling or damaging
it.
WARNING: It could take a few minutes to
remove and replace the fabric cover; this
operation must be performed by adults
only.
REMOVABLE COVERS
8. Remove the mattress.
9. To remove the cover, undo the four zips
along the top edges of the crib (Diag. 7) and
carefully remove the frame.
10. To remove the mattress cover, undo the
two zips on the mattress base (Diag. 7A)
and carefully remove the base and padding.
11. Follow the previous instructions in re-
verse order to replace the covers.
13