Functions; Self-Cleaning - Kasanova KWI000017 Manuel D'instruction

All manuals and user guides at all-guides.com
CERAMIC
14

FUNCTIONS

Dry Ironing:
For dry ironing, turn the steam control to the minimum position and set the
temperature control to the correct position.
Spraying:
To spray the item that you are ironing, press the spray button and steam will
spray out from the spraying nozzle. Ensure that there is enough water in the
water tank.
Steam Ironing:
1. To steam iron, turn the steam control to the minimum position and set the
temperature control to the "..." or "max" position.
2. After the indicator goes out, turn the steam control to a suitable position and
steam will be sprayed and ironing can start.
Burst Of Steam:
Set the temperature control to the "..." or "max" position, then press the burst
of steam button. The base plate will spray out a burst of steam.

Self-Cleaning:

The self-cleaning function is used to clean the soleplate after you have used
this iron for about
1. Fill the iron and plug in
2. When the temperature reaches "MAX", press the self-clean button for about
1 minute
3. WARNING: Conduct self- cleaning over a sink so as avoid burns from hot
water spilling over the user.
Anti-Drip:
This iron is equipped with a drip stop function. The iron automatically stops
steaming when the temperature is too low, so as to prevent water from
dripping out of the soleplate.
Anti-Calc:
The anti-calc function filters the minerals from the water to prevent mineral
residue build-up in the steam chamber.