All manuals and user guides at all-guides.com
5.4.
DEWPOINT mode
Measure the IR temp. and dewpoint temperature.
Press and hold trigger to measure the temperature.
The percentage indication shows that dew point temperature and IR
temperature overlap each other.
5.5.
Data logging
In the DATALOG mode, first set the parameter, like
high alarm value, low alarm value, interval time and
the line color, then press the trigger to start logging.
The unit will automatically record data, press the
ESC button to esc the DATALOG mode, then the
data will automatically save.
Set the datalog parameter.
Set high alarm value.
Press the ENTER button, use the and button
to adjust the value, then press the ENTER button to confirm.
Set low alarm value.
Press the ENTER button, use the and button to adjust the value,
then press the ENTER button to confirm.
Set interval time.
Press the ENTER button, use the and button to adjust the value.
Select the color.
Press the ENTER button, use the and button to select the color,
then press the ENTER button to confirm.
Manual NTA70006-700A – IT/EN/FR
29