Specifications - Ramaudio PJO 700 Manuel Utilisateur

SPECIFICATIONS

Inputs Connector
MIC A
SUB-D 15
MIC B
SUB-D 15
MIC C
SUB-D 25
LINE A
SUB-D 25
LINE B
Telephone
Return
- For Micro , Phantom power supply : 12V or 48V or disabled
- Distorsion : < 0,03% +4 dBu IN Line A / +4 dBu OUT
- Distorsion : < 0,05% -34 dBu MIC A / B / C at +4 dBu OUT
- Bandwidth : 10 Hz / -1 dB to 30 KHz / -0,5 dB
- Crosstalk at 1 KHz : > 90 dB Line A / B / C
- Noise to the input, for Mic A / B / C : -129 dBu A weighted
- SNR : 90 dBA at nominal level and 111 dBA at clipping
Sorties Connecteur
OUT Insert
SUB-D 25
Direct OUT
SUB-D 25
Monitor
Phones A and B
Telephone Send
- Limiter setting :
- Bargraph peakmeter : 0 dB at +12 dBu / OUT or Monitor.
- Bargraph peakmeter : 0 dB at -9 dBFs on sound card.
- Don't unbalanced the Direct out and monitor. Takes hot point and ground.
Rami - PJO 700
All manuals and user guides at all-guides.com
Type
XLR Balanced
Balanced
Balanced
Balanced
Balanced
Balanced
RJ 11
Type
Balanced
Balanced
Jack Unbalanced
RJ 11 Balanced
- 15 dBu max, clockwise
- Off max, anticlockwise
Impedance Sensitivity
* Fader to 0dB :
200 
-62 dBu to -34 dBu
* Fader to +6dB : -68dBu max
* Fader to 0dB :
200 
-62 dBu to -28 dBu
* Fader to +6dB : -68dBu max
* Fader to 0dB :
200 
-62 dBu to -28 dBu
* Fader to +6dB : -68dBu max
* Fader to 0dB : +4 dBu
15 K
* Fader to +6dB : -2 dBu
* Fader to 0dB : +4 dBu
15 K
* Fader to +6dB : -2 dBu
600 
-27 dBu
Impedance Nominal Level
100  +4 dBu
100 
+4 dBu
100 
+8 dBu
600  -10 dBu
25
Clipping
-13 dBu
-7 dBu
-7 dBu
+26 dBu
+26 dBu
-1 dBu
Maximum Level
+25 dBu
+24 dBu
+19,5 dBu
-2 dBu
Internal limit
ENGLISH