Overview Of Functions - ulsonix PROCLEAN 507 Manuel D'utilisation

CAUTION
• Do not clean porous stones or pearls in the device
• The watches must be waterproof (at least 30m)
• It is possible that loose parts of the object while cleaning
• Objects which easily lose their color should not be cleaned in the unit

OVERVIEW OF FUNCTIONS

1 stainless steel cover to reduce noise and speed
up the heating
2 basin out of stainless steel
with mark-filled 2 / 3
3 touch screen / control
panel
4 Display of the programmed or
remaining time
5 LED: illuminates when the
unit is in cleaning mode
6 Display of the seconds
remaining when cleaning
9 Serial number
7 Button for the timer
under the unit
(+ or -)
8 Start / Pause button and
memory function
12
All manuals and user guides at all-guides.com
18 plug socket on the back of the unit
17 heater on the back of the unit
16 Handle
15 Drain for the cleaning fluid
14 Displays the current tempera-
ture in ° C
13 LED: illuminates when the unit
heats up
12 Display of temperature in ° C.
Shows the desired temperature for the
cleaning liquid.
11 Button of Control for the heating
options (+ or -)
10 ON / OFF
MANUAL
1. Open the cover and place the objects to be cleaned in the basket Fill the basin
with water up to 2 / 3. Note: Do not use without water or without enough
water.
2. Close the cover and plug the device
3. All buttons are tactile. A simple touch is enough. Press the button No. 10 to turn
on. The cleaning process begins. You can now set the desired temperature and
time.
4. Set temperature: Display No 14 shows the temperature of the cleaning liquid. To
heat the liquid, use arrows No. 11 (up to raise the temperature, down to lower
it). If the temperature is higher than the current temperature, the unit starts to
heat up and the LED lights up. Once the desired temperature is reached, the
diode turns off.
5. Setting the time: When the device is on, you see on display number 4 the time
set in the previous cleaning. Press No 7 to set the time (up to increase, down to
lower)
6. After setting the time, press START to begin the cleaning. A red LED turns on.
When the countdown begins (No 6), cleanup is almost complete. Cleaning will
stop automatically at the end of programmed time. The time programmed by the
last use appears (No. 4)
7. Pause function and memory: Press the green button Start / Pause (No. 8) to acti-
vate the memory function. When time is up and you touch the green button, the
programmed time is saved. If the cleaning process is underway and you press the
green button, the cleaning is paused. To restart, repress the green button.
8. When cleaning is finished, press the ON / OFF (No. 10) button to turn off the
device. Remember to unplug it after use. Empty the basin so that the unit is
completely empty.
13