Rear Panel Connections; Loudspeaker Connections - Cambridge Audio azur 340A Mode D'emploi

REAR PANEL CONNECTIONS

Designed and Engineered in London, England
Aux CD Tuner / DAB DVD
AC power socket
Once you have completed all connections to the amplifier, plug the AC
Power Cable into an appropriate mains socket. The amplifier is now
ready for use.

Loudspeaker connections

The 340A has two sets of Loudspeaker terminals on the rear panel,
speakers A and B. Speakers A are the main speaker terminals, speakers
B are the secondary switchable speaker terminals. Connect the wires
from your left channel loudspeaker to the LEFT + & - terminals, and
likewise the wires from the right channel loudspeaker to the RIGHT + &
- terminals. In each case the red terminal is the positive output, and the
black terminal is the negative input. Care should be taken to ensure no
stray strands of wire are shorting speaker outputs together.
6 azur integrated amplifier
azur 340A Integrated Amplifier
Power Rating: 230V AC
Max Power Consumption
Caution
Risk of electric shock
Do not open
Left
Avis Risque de choc electrique
Ne pas ouvrir
Achtung
Vorm offnen des gerates
Right
Netzstecker ziehen
AV / MD Rec-Out Tape In
50Hz
:
345W
Right A Left Right B Left
Note: This amplifier has been designed for use with loudspeakers that
have a nominal impedance of between 4 and 8 ohms.
Please ensure that the speaker terminals have been tightened
adequately to provide a good electrical connection. It is possible for the
sound quality to be affected if the screw terminals are loose.
Tape mon
These sockets can be connected to a tape deck or to the analog sockets
on a MiniDisc or CD recorder. Connect an interconnect cable from the
recorder's Line Out sockets to the amplifier's Tape Monitor sockets. This
monitor doubles up as the standard tape/recording medium input.
Note: When connecting a source component that has both an input and
output i.e. a tape recorder, the output of should always be connected to
the Tape Mon input. This will eliminate howlround if the wrong input
channel is selected.
Caution
Serial Number Label Removed
Power AC
Impedance 4 - 8 ohms
Loudspeaker Terminals
www.cambridge-audio.co.uk
ISO9002
Manufactured in an approved facility