Resuming Playback - JVC XV-FA900BK Manuel D'instructions

Basic operations

Resuming playback

The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later.
There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 67 for details
about how to set the resume mode.
• When purchasing the unit, the resume mode is initially set to "ON" .
• You can deactivate the resume mode by setting "RESUME" on the "OTHERS" preference display to "OFF" .
TV
STANDBY/ON
OPEN/ DISC
TV
CLOSE SELECT
OPEN/CLOSE
TV1 TV2
1 2
TV4 TV5
4 5
TV7 TV8
7 8
TV-/-- TV0
10 0
TITLE/
RETURN PAGE GROUP
CH
+
VOL-
ENTER
CH
-
PREVIOUS
CLEAR SELECT
7
SLOW-
.
To memorize the interrupted position
¶ During playback
When the resume mode is set to "DISC RESUME"
Press 7
.
The unit stops playback and memorizes the interrupted position. After pressing 7, the display window on the front
panel shows "----RESUME" (DVD AUDIO/DVD VIDEO) or "--RESUME" (SVCD/Video CD).
In this condition, a memory of the interrupted position is not cleared if you press 0 OPEN/CLOSE to open the disc
tray carousel, or press DVD STANDBY/ON
turn off the unit.
• If you do not want the disc played to resume playback, press 7 while stopped.
• It memorizes positions interruputed for the last 30 discs.
• If you interrupt playback of a disc which you resumed playback, the memory is updated to store the new interrupted position.
• When the unit has already memorized positions for 30 discs, memorizing one more position for a disc automatically erases the
oldest memory. On the other hand, if you interrupt playback of a disc which an interrupted position is already memorized, the order
of memorized discs may change. In result, when memorizing a new data, the order of memorized discs to be erased also may
change.
When the resume mode is set to "ON"
Press 7
.
The unit stops playback and memorizes the interrupted position. After pressing 7, the display window on the front
panel shows "----RESUME" (DVD AUDIO/DVD VIDEO) or "--RESUME" (SVCD/Video CD).
In this condition, a memory of the interrupted position is not cleared until you press OPEN/CLOSE,
DVD STANDBY/ON
• If you do not want the disc played to resume playback, press 7 while stopped.
22
DVD
DVD
TV3
3
TV6
6
STANDBY/ON
TV9
9
STANDBY/ON
MUTING
+10
TV/VIDEO
CANCEL
VOL+
3
NEXT
STROBE
SLOW+
on the remote control unit or STANDBY/ON
on the remote control unit or 0 OPEN/CLOSE, STANDBY/ON
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
DVD AUDIO PROGRESSIVE
Disc tray carousel
Available :
0OPEN/CLOSE
OPEN/CLOSE
EXCHANGE DISC SKIP
0
PLAY
3
STOP PAUSE
7 8
7
- DISC 4 ¢
SKIP
PLAY & EXCHANGE
3 7
on the front panel to
on the front panel.