Real Cable HDS-12 Manuel D'utilisation page 4

3. Installation
3.1. Recommendations
Switch off all devices (source, screen) before installing.
Connect the power supply only after HDMI connections are fully achieved.
Respect the indicated connections :
o Source (Blu-ray player, HDTV receiver, etc.) on "Input".
o Displays (HDTV, videoprojector, etc.) on the output "Output 1 and 2"
Never use another power adaptor than the supplied one.
Foresee an accessible installation area.
3.2. Diagram of connection
4/12
Real Cable ®