Charging The Internal Battery - Wagan Tech Brite-Nite Wayfinder LED Light Guide D'utilisation

All manuals and user guides at all-guides.com
Brite-Nite Wayfinder LED Light
™

CHARGING THE INTERNAL BATTERY

Please charge before initial use. In order to prolong the life of the battery, be sure
to fully recharge the unit every 3 to 6 months, even if the unit has not been used.
1. Connect the micro-USB end of the USB cable to the flashlight's input port.
2. Plug the other end of the cable into a USB power port such as a USB wall
charger, USB car charger or power bank.
3. The charge indicator LEDs will illuminate to show the level of charge (25%-
100%). While recharging, the next LED will flash, followed by the next until
fully charged. It is fully charged when all 4 LEDs illuminate.
3
by Wagan Tech
™
www.wagan.com
®